She advises applying adhesive to the wall using a trowel, starting from the center and working outwards, applying only as much as you'd like to apply to a few tiles at a time. “Place the tiles flat against the wall on top of the adhesive and repeat the same steps using spacers between each tile to ensure even lines of grout. Wipe off excess adhesive and once cured, use spacers If you are installing tiles between cupboards, you may need to use a manual cutter to trim the edge tiles to fit.
“Grout color is another way to customize your project,” Smoor says. “Mix according to the instructions, but don't mix too much at once to avoid drying out.” Then, use a grout float to penetrate the joints. ” It will take approximately 15 minutes for the grout to dry. Finally, thoroughly clean the tile and apply a thin layer of silicone where the tile meets the vanity.
See more: fantoush.com
6. Make an under-counter curtain
“Undercounter curtains are great for adding texture to a utilitarian room,” says Nicole Salvesen, co-founder of interior design firm Salvesen Graham. “You can also draw curtains to hide your washing machine, or use them in place of cupboard doors to create storage by adding shelves behind them.” The key is to use materials like light linen or cotton. It's all about choosing the fabric, she says. “It's a good opportunity to use your favorite fabrics because they don't require a huge amount, like measuring the height and width of the space and then adding 25 percent.”